canon-eos-5d-mark II firmware update

Canon EOS 5D Mark II - Da li vidite crne tačke?

Krajem decembra prošle godine Canon je i zvanično priznao postojanje problema koji su se javljali na nekim primercima EOS 5D Mark II fotoaparata. Problemi su se ispoljavali tako što se moglo desiti da na fotografijama sa jakim izvorom svetla, dobijete crne tačke po fotografiji i u nekim slučajevima da dođe do pojave vertikalnih linija ( bandinga ) preko cele fotografije ( sličan problem je imao i Nikon ).

Nije prošlo mnogo od zvaničnog priznanja postojanja problema, Canon već nudi novu verziju firmvera 1.0.7 za EOS 5D Mark II, koji rešava pomenute probleme.

U nastavku sledi zvanično saopštenje kompanije.

Important information for EOS 5D Mark II users.

We have learned that some users of the Canon EOS 5D Mark II digital SLR camera (with firmware version 1.0.6) have identified two types of image quality phenomena that appear under certain shooting conditions.

  1. “Black dot” phenomenon (the right side of point light sources becomes black)
  2. Vertical banding noise

Details of the phenomena and shooting conditions under which they are likely to occur (if the firmware is version 1.0.6) are as follows:

  1. “Black dot” phenomenon (the right side of point light sources becomes black)
    When shooting night scenes, the right side of point light sources (such as lights from building windows) may become black. The phenomenon may become visible if the images are enlarged to 100% or above on a monitor or if extremely large prints of the images are made.
  2. Vertical banding noise
    If the recording format is set to sRAW1, vertical banding noise may become visible depending on the camera settings, subject, and background.
    ▪ Vertical banding noise is not noticeable if the recording format is set to sRAW2.
    ▪ Vertical banding noise does not occur if the recording format is set to RAW or JPEG.
    ▪ Noise can be reduced if C.Fn II-3: Highlight tone priority is set to 0: Disable.

Firmware version 1.0.7. that addresses these phenomena is now available for downloading from the following Web site:

http://web.canon.jp/imaging/eosd/firm-e/eos5dmk2/firmware.html

When updating to firmware version 1.0.7, please also update the Digital Photo Professional and Picture Style Editor software. For details, please read the Firmware Q&A section on the firmware download page.